temporary stairs – steel

ANY QUESTIONS?

CONTACT US

Temporary stairs are a common sight at the construction sites. Whenever there is a need to overcome small or significant differences in level, Using wood or concrete structures may be difficult in set up and risky to use.

Therefore, our temporary stairs / walkway solution is the perfect substitute as they are easy to assemble, safe to use, and can be repositioned and moved at any time.
Additionally, the stars can easily be transformed into a gangway and are part of the TAS staircase solution.

KEY FEATURES

Wide angle of inclination: from O° to 50°
Modularity – available in single flight modules with 3, 6, 9, 12, 15, 18 steps
Possibility to mount railings on one or both sides
Automatic steps levelling
Possibility to change the place of use at any time
Possibility to connect flights (e.g. 18+18, 15+12 steps) when using connectors and supports
Possibility to use a handle lowering last step

3 steps

6 steps

9 steps

12 steps

15 steps

18 steps

The stairs meet the requirements of the PN-EN 12811-1:2007 standard regarding the class 1 carrying capacity (1 kN on 200x200mm surface) and are adapted for self-assembly with the use


usable width 700 or 1000 mm
temporary stairs
gangways (up to 8 metres)
scaffolding stairs
step-over platform
staircases

Let's see our new animation of TAS temporary stairs

Temporary stairs system can consists of 6 basic modules of 3, 6, 9, 12, 15, 18 steps. Angle regulation is possible from 0° to 50° for modules from 3 to 12 steps, and from 25° do 50° for 15- and 18-steps modules. The stairs are to be assembled on a previousl prepared surface attaching the lower and the upper part. The table below shows basic parameters of the available modules.

The table below shows basic parameters of the available modules.


NUMBER OF STEPS	3		6		9		12		15		18
WIDTH [mm]	700	1000	700	1000	700	1000	700	1000	700	1000	700	1000
FLIGHT LENGHT [m]	0,8		1,61		2,42		3,23		4,05		4,86
HEIGHT [m]	0-0,6		0-1,2		0-1,8		0-2,4		1,6-3,0		2,1-3,6
WEIGHT [kg]*	47	56	74	93	105	134	133	171	162	208	192	248
POSSIBILITY TO USE AS A GANGWAY	YES								YES (when used with a truss)

VARIANTS OF TAS STEEL STAIRS

TAS staircases to the floor of the building. Temporary communication on construction site – safe, solid, easy to install.

Temporary stairs to excavations banks

TAS stairs used as a gangways. A safe way to overcome trenches or technological holes. A solid and universal design for your construction site.

A STEP-OVER PLATFORM that will allow employees to overcome small obstacles.

ANY QUESTIONS?

CONTACT US

604 804 589

A full range of variants of stairs and additional accessories is available in the catalog or from sales managers.

DOWNLOAD CATALOGUE

FREQUENTLY ASKED QUESTIONS

What components are included in the complete set of TAS excavation stairs for lease?
How does the assembly of the walkway/stairway look after delivery to the construction site?

The module with its individual components is delivered to the construction site with disassembled, folded handrails, what significantly reduces the amount of space required for transport and storage. As the steps self-level and have sockets for quick assembly of handrails, the installation is smooth and requires little time. It is necessary to read the operation and maintenance documentation and installation manual before installing and using the stairway.
Is it necessary to disassemble individual components to move the stairway to a different spot?
Can the TAS stairs only be used for excavations?
How is the system delivered to the construction site?

The basic components of the systems are stairs and handrails. The handrails are disassembled for the time of transport to the customer. Assembly consist in combining the guard rail and the stairway. Installation of the entire system is very simple and takes literally a few minutes, but before commencing installation and use one should read the operation and maintenance documentation and the installation manual.
What is the usable width of the stairs/walkway?
Do the people installing the stairway must be licensed to install temporary civil engineering structures?
What is the max height of the stairway?

The temporary stair system consist of 6 basic modules having respectively 3, 6, 9, 12, 15 and 18 steps. The max height of an individual stairway is 3,6m. Construction of the stairs allows for assembling individual modules to adapt the stairway to one’s individual needs. When assembling modules to create one long set of stairs it is necessary to use additional equipment, that is fasteners and supports. To connect the modules, one needs to use special auxiliary components, that is fasteners and supports. Before placing an order, please inform how do you plan to assemble the stairway so that we can supply you with all the necessary components.
What information needs to be communicated to the person receiving the order to select the proper module/variant of the stairway?
How do you assemble the TAS walkway?

Thanks to its modular construction, the TAS system allows making a temporary construction site walkway to ensure safe passage over excavations or ditches. The minimal length of the walkway extending outside of the edges on the both sides of the excavation equals D=500 mm. In case of the basic version of the TES walkway, the regulation from 0 to 50 degrees is possible for modules having from 3 to 12 steps. To use the longest variants (15 and 19 steps) as a horizontal walkway, one must also install the grating included in our system to strengthen their structure. In such a case the minimal length of the walkway extending outside of the edges of the both sides on the excavation is D= 700 mm. Additionally, the walkway must be anchored to the ground.