Skip to content
edge-protection-m
edge-protection-system

Our Edge Protection System is a modern fall protection system designed to secure building and construction edges, technological openings (elevators, etc.), roof edges, passageways and other areas where there is risk of falling from height.

Meeting all European safety standards, EPS ensures that any construction site meets all EU regulations, which can be rigorous in the industry. It does this by offering protection from falls, through its engineered edge fall prevention system.

Edge Protection System is a modern security system made in compliance with the class A EN 13374:2013-08 standard, dedicated to secure building and construction site edges, technological openings, passaweways and other places where there is risk of falling from height

STANDARD FEATURES OF AVAILABLE SOLUTIONS

  • Easy, well-thought out and tested solutions that quarantee reliability and the highest possible safety level
  • Robust anti-corrosive protection to provide long-term durability of all elements even if exploited
  • Assebbly of the system elements does not require highly-qualified personnel
  • Wide offer of holders and fixings
  • Special transport baskets facilites loading , unloading, transport and storage of all elements
  • Innovative CLICK system – an embossed channel which fist the ratchet system. The elements are connected with each other with a special click-fit that guarantee the connection until the blockade is released
  • The product received a positive opinion of Mechanised Construction and Rock Mining Institute for compliance with EN 13374:3013-08 standard

LET’S SEE OUR NEW ANIMATION OF EPS SYSTEM

APPLICATION OF EPS SYSTEM

Horizontal screw - fastened holder
Horizontal screw – fastened holder
Vertical screw - fastened holder with extension
Vertical screw – fastened holder with extension
Girder holder
Girder holder
Clamping holder L500/L800
Clamping holder L500/L800
Stair holder
Stair holder
Horizontal permanent holder
Horizontal permanent holder
Vertical permanent holder
Vertical permanent holder
Wall holder
Wall holder
Latching holder
Latching holder
Steel structures holder
Steel structures holder
Drop-in holder
Drop-in holder
Working platform holder
Working platform holder
edge-protection-system-0
Formwork girder
Formwork girder
Facade holder
Facade holder
Bracket clamp with post
Bracket clamp with post
Formwork girder
Formwork girder
Facade holder
Facade holder
Bracket clamp with post
Bracket clamp with post

Eps system - ACCESSORIES

edge-protection-system-16
Consists of resistively welded, galvanized and RAL painted steel rods. Maximum span
between posts is 2400mm. Available with client’s logo on a sign on request.

EPS mesh panel

Consists of resistively welded, galvanized and RAL painted steel rods. Maximum span between posts is 2400mm. Available with client’s logo on a sign on request.
Timber planks in 2500 x 150 mm dimension. The maximum span between the posts is 2000 mm. Available with client’s logo on request.

Timber planks

Timber planks in 2500 x 150 mm dimension. The maximum span between the posts is 2000 mm. Available with client’s logo on request.
Made of steel and assembled on system post hooks.

Scaffolding tube

Made of steel and assembled on system post hooks.
System post with two universal hooks that allow for assembly of any railing type.

System post

System post with two universal hooks that allow for assembly of any railing type.
Available in two sizes: 190 and 250 mm.

Post extension

Available in two sizes: 190 and 250 mm.
Horizontal screw-fastened holder

Horizontal screw-fastened holder

Designed to avoid interference with most of the construction works.

Vertical screw-fastened holder

Designed to avoid interference with most of the construction works.
Suitable for every girder height with maximum width of the upper T being 95 mm.

Girder holder

Suitable for every girder height with maximum width of the upper T being 95 mm.
Holder for steel structure to improve clamping of the holder equipped in teeth fostening edges.

Holder for steel structure

Holder for steel structure to improve clamping of the holder equipped in teeth fostening edges.
 Latching holder

Latching holder

Universal solution used in numerous configurations. It allows assembly
without compromising the structural element.

Clamping holder L500

Universal solution used in numerous configurations. It allows assembly without compromising the structural element.
Universal solution used in numerous configurations. It allows assembly
without compromising the structural element.

Clamping holder L800

Universal solution used in numerous configurations. It allows assembly without compromising the structural element.
The holder construction allows to clamp items from 15 to 330 mm thick.

Stair holder

The holder construction allows to clamp items from 15 to 330 mm thick.
Thanks to the integrated construction it ensures better stability of the railing and reduces the time required for assembly. The bracket clamping is realised with the formork tie ensuring fast regulation and secure assembly.

Bracket clamp with post

Thanks to the integrated construction it ensures better stability of the railing and reduces the time required for assembly. The bracket clamping is realised with the formork tie ensuring fast regulation and secure assembly.
Resistant to most of the materials used at the construction site, e.g.
concrete mixture, cream of lime, etc.

Horizontal permanent holder

Resistant to most of the materials used at the construction site, e.g. concrete mixture, cream of lime, etc.
Resistant to most of the materials used in construction sector, e.g. concrete mixture, cream of lime, etc.

Vertical permanent holder

Resistant to most of the materials used in construction sector, e.g. concrete mixture, cream of lime, etc.
Designed to ensure high resistance to dynamic forces.

Drop-in holder

Designed to ensure high resistance to dynamic forces.
Additional element used with wooden plank protection

Plank lower holder

Additional element used with wooden plank protection
The holders must always be used in sets of two assembled opposite each
other.

Working platform holder

The holders must always be used in sets of two assembled opposite each other.
Additional element used for barrier protection.

Wall holder

Additional element used for barrier protection.
Allows for formwork operations on edges that protrude beyond the outline of the wall.

Formwork girder

Allows for formwork operations on edges that protrude beyond the outline of the wall.
Facade Holder has a simple design that facilitates assembly to steel and concrete structures. The holder
allows to move the barrier away from the assembly area up to 350 mm.

Facade holder

Facade Holder has a simple design that facilitates assembly to steel and concrete structures. The holder allows to move the barrier away from the assembly area up to 350 mm.
A base for the horizontal screw-fastened holder EPS-UPZ

Steel foot

A base for the horizontal screw-fastened holder EPS-UPZ
It serves as a base for the EPS-SL-V3 base assembly.

PVC STABILIZING FEET

It serves as a base for the EPS-SL-V3 base assembly.

FREQUENTLY ASKED QUESTIONS

EPS SYSTEM – EXAMPLES